Automatic Paddle Blade Industrial Drying Equipment For Sea Sand
Equipment Introduction:
Automatic paddle blade industrial drying equipment is one kind of heat conduction based horizontal
mixing and drying equipment. The required amount of heat for this equipment is rely on the indirect
heating of heat conduction, so the air is not required or only little air is required in the drying process to
take the moisture away, which greatly reduce the heat waste being taken away by the air and the
utilization of heat is improved, it’s one kind of energy saving dryer and suitable for drying particles,
powder and paste material. PLC automatic control system can be adopted in the entire system, which
contains advanced testing equipment, thermometer, temperature control device, fault alarm and
automatic shutdown protection etc.
Working Principle:
KJG hollow paddle blade industrial drying equipment is one kind of low-speed mixing type and
continuous indirect heating equipment to conduct heat to dry (chill-down) materials by the hollow blade
of sector structure. There are two pieces of parallel rotation axes of mounted staggered blades in the
jacket structure cylinder of tis equipment, many pieces of hollow blade of sector structure mounted on
each axis staggered by a certain interval, there are two kinds of blades (feeding shear plane and return
shear surface), the axes rotate at low speed. The hot medium enters into the hollow rotary axes and
blades through the rotary joint installed at the end of the rotating axes, be dried after heating, which will
be discharged out of dryer through the rotary joint. In addition, the hot medium will be led into the jacket
structure. Materials will be fed constantly through the feeding end, and which will be stirred and mixed
through blades, and materials will be dried through heat conduction between the blades and jacket
structure at the same time, and materials will be discharged while it’s being heated. The retention time
can be adjusted by changing the height of the overflow weir. The raw materials will be fed into the dryer
and will be conveyed the discharge port to be discharged out through the hollow paddle blades. The
materials will be stirred by the hollow paddle blades during the conveying process, meanwhile, which
will be dried through evaporation by the simultaneous heating of the hollow paddle blades and jacket
structure, with high thermal efficiency. The continuously variable transmission is adopted and connects
with the gear box in this dryer, 5-20rpm, the rotation speed can be adjusted according to material
properties. The air is being exhausted from exhaust vent.
Technical Parameters:
Model | Heat transfer area(m2) | Effective volume(m3) | Rotary speed (r/min) | Power (kW) | Overall dimension (mm) |
KJG3 | 3 | 0.06 | 15-30 | 2.2 | 2972×736×762 |
KJG9 | 9 | 0.32 | 10-25 | 4 | 4876×841×838 |
KJG13 | 13 | 0.59 | 10-25 | 5.5 | 5486×1066×1092 |
KJG18 | 18 | 1.09 | 10-20 | 7.5 | 5918×1320×1270 |
KJG29 | 29 | 1.85 | 10-20 | 11 | 6808×1474×1524 |
KJG41 | 41 | 2.8 | 10-20 | 15 | 7570×1676×1778 |
KJG52 | 52 | 3.96 | 10-20 | 30 | 8306×1854×2032 |
KJG68 | 68 | 5.21 | 10-20 | 45 | 9296×2134×2362 |
KJG81 | 81 | 6.43 | 5-15 | 55 | 9678×2286×2464 |
KJG95 | 95 | 8.07 | 5-15 | 75 | 9704×2438×2566 |
KJG110 | 110 | 9.46 | 5-10 | 90 | 9880×2668×2668 |
Case:
Phlippines Drying Plant Project
Year : 2014
Location : Philippines
Service: Complete Drying Plant Design, Production, Installation and Commissioning and Technical Support.
It is designed to get dry copper concentrate at 65000tpa. This plant is mainly composed of Sawdust Burning Furnace, Rotary Dryer and Dust Collecting System. After visiting several factories, Unisystem company finally choose Lipu considering high quality, competitive price and good service.
Product Tags:
|
|
Automatic Paddle Blade Industrial Drying Equipment For Sea Sand Images
|
